Home News Artists Gallery Chapter News Order Info Links Contact Us

Sharpening - Strops, Slips and Stones

All prices shown are in Canadian Dollars

4-piece Ceramic Slip Set

These sharpening files are 8000 grit, ready to debur hardened steels and even carbide. Sold as a set of 4 in round, square, slip and triangular profiles. Comes in a snap-front suede pouch.

Ceramic Double Stuff

Double Stuff is a double-sided pocket stone with medium and fine grits bonded together offering a variety of sharpening options. Comes packaged in its own leather case. Medium side is 800 grit and the fine side is 8000 grits *Photo shows two stones but actual product is a single piece, double-sided stone.

Black Arkansas Stone

These natural hard Arkansas stones are the finest grade abrasive stones available. Use on gravers, knives and other cutting tools when an extremely fine polish and a keen cutting edge are required. 3"L x 3/8"H *Note: Photo shows square profile as an example only, the stone you will be getting has a triangular profile.

Black Arkansas Stone

3"L x 1/4"D *Note: Photo shows square profile as an example only, the stone you will be getting has a round profile.
Black Arkansas Bench Stone

For precision sharpening or finishing a very sharp edge. Dense, black stone, more aggressive than Norton Arkansas stones. Measures 6"L x 2"W x 1/2"H. Packaged in an attractive cedar box. Finished on both sides.


A very hard and coarse silicon carbide stone with 4 half-round grooves measuring 1/16", 1/8", 3/16" and 1/4" on one side. Quickly reshapes and resurfaces abrasive stones to like-new condition. Measures 3-1/2"L x 1-3/8"W x 5/8"H overall.

Flexcut SlipStrop
The Flexcut SlipStrop is an economical way for maintaining your tool's razor edge. It has been moulded to allow for polishing and deburring the hard-to-reach areas on the inside of V-tools and gouges as well as the outside edge bevel. Either side of the strop can be used. Each SlipStrop includes a mini-bar of Flexcut Gold polishing compound and detailed instructions.

Flexcut Gold
Polishing Compound

Designed for quickly maintaining a sharp edge, Flexcut Gold Polishing Compound has been specially formulated to apply like a crayon. Its blend of aluminum and titanium oxide provide a balance between aggressive removal of hardened tool steel and offering a high-color polish.

If you can't find what you're looking for or have a specific request, please feel free to contact us at:

Tel: 905-257-8423   Fax: 905-460-0794

*Prices are subject to change without notice*

Copyright © 2017 Nutmeg Woodworking and Carving Shop, Inc.